Microswitch Kit, Quick Connect for Universal Control Head
B-87-030The Quick Connect Microswitch used with the Universal Control Head is a single pole, double-throw switch.
For Use in: • Range Guard® Commercial Cooking Fire Suppression Systems • Industry Guard™ Industrial Fire Suppression Systems
For Use with Universal Control Head (UCH
Stackable with Alarm/Release Terminal Type Universal Control Head Microswitch
Images are representative only.
Actual product may vary slightly.
Specifications
| Model | B-87-030 |
| Warranty | 6 year limited |
The Quick Connect Microswitch used with the Universal Control Head is a single pole, double-throw switch. Included in the microswitch kit is the microswitch, pigtail assembly, mounting screws, and wiring diagram label. Microswitch Kit P/N 87-120039-001 includes a pigtail assembly with solid color leads. Microswitch Kit P/N 87-120039-501 includes a pigtail assembly with striped leads. All wire leads are 24 inches (610 mm) in length. Quick Connect Microswitches are used to open or close electrical circuits, including, but not limited to: • Electric appliance shutdown • Make-up air shutdown • Electric gas valve shutdown • Shuntbreaker/relay Electrical appliances typically have higher amp ratings than those of the microswitches. In this case, appliances shall not be wired directly to the microswitch. A magnetic contactor or relay must be used. For wiring the microswitch with the Universal Control Head. Quick Connect Microswitch Kits are not for alarm initiation or solenoid release. A separate Alarm/Release Terminal Type Microswitch (P/N 87-120047-001) is available. The Universal Control Head has two separate microswitch mounting locations to support up to four (4) microswitches (any combination of Quick Connect and/or Alarm/Release type). Each of the two mounting locations has a corresponding EMT port for wire leads, allowing the use of two electrical junction boxes for separation of signal lines and AC lines.
- For Use in Range Guard® Commercial Cooking Fire Suppression System and Industry Guard™ Industrial Fire Suppression System
- For Use with Universal Control Head (UCH)
- Stackable with Alarm/Release Terminal Type Universal Control Head Microswitch
Specifications
| Model | B-87-030 |
| Warranty | 6 year limited |
The Quick Connect Microswitch used with the Universal Control Head is a single pole, double-throw switch. Included in the microswitch kit is the microswitch, pigtail assembly, mounting screws, and wiring diagram label. Microswitch Kit P/N 87-120039-001 includes a pigtail assembly with solid color leads. Microswitch Kit P/N 87-120039-501 includes a pigtail assembly with striped leads. All wire leads are 24 inches (610 mm) in length. Quick Connect Microswitches are used to open or close electrical circuits, including, but not limited to: • Electric appliance shutdown • Make-up air shutdown • Electric gas valve shutdown • Shuntbreaker/relay Electrical appliances typically have higher amp ratings than those of the microswitches. In this case, appliances shall not be wired directly to the microswitch. A magnetic contactor or relay must be used. For wiring the microswitch with the Universal Control Head. Quick Connect Microswitch Kits are not for alarm initiation or solenoid release. A separate Alarm/Release Terminal Type Microswitch (P/N 87-120047-001) is available. The Universal Control Head has two separate microswitch mounting locations to support up to four (4) microswitches (any combination of Quick Connect and/or Alarm/Release type). Each of the two mounting locations has a corresponding EMT port for wire leads, allowing the use of two electrical junction boxes for separation of signal lines and AC lines.
- For Use in Range Guard® Commercial Cooking Fire Suppression System and Industry Guard™ Industrial Fire Suppression System
- For Use with Universal Control Head (UCH)
- Stackable with Alarm/Release Terminal Type Universal Control Head Microswitch
FIRE SUPPRESSION SYSTEMS
Badger Fire offers both Industry Guard for Industrial Applications and Range Guard for Commercial Kitchen Applications. Industry Guard is an economical, easy to install and maintain Dry Chemical system, ideal for protecting industrial applications and spray booths. Range Guard is a Wet Chemical system that suppresses fires within commercial kitchens full of ranges, broilers, fryers, and other high temperature cooking appliances.
ABOUT BADGER FIRE
Badger fire protection products have been manufactured for more than 100 years. Located in Mebane, North Carolina, Badger offers a comprehensive range of industrial-grade fire extinguishers, dry chemical fire suppression systems and Range Guard®, the nation’s first commercial kitchen wet chemical fire suppression system. Badger designs and manufactures industrial-grade fire extinguishers that solve customer challenges while setting the standard in fire protection performance and value.