Alarm/Release Terminal Type Microswitch
87-120047-001The Alarm/Release Terminal Type Microswitch is a single pole, double-throw switch used for supervision of the Universal Control Head for alarm activation and release actuation.
For use in both Range Guard® Commercial Cooking Fire Suppression Systems and Industry Guard™ Industrial Fire Suppression Systems
Used for Alarm Circuit and Release Circuit • Screw-type Terminals for Secure Wire Mounting
Screw-type Terminals for Secure Wire Mounting
Stackable with Quick Connect Universal Control Head Microswitch
Images are representative only.
Actual product may vary slightly.
Specifications
| Model | 87-120047-001 |
| Warranty | 6 year limited |
The microswitch kit (P/N 87-120047-001) includes the switch, non-conductive shield and mounting hardware. The Alarm/Release microswitch provides approved supervision for the alarm zone circuit of the Kidde AEGIS™ and ARIES™panels, and for other UL Listed control panels (Figure 2). The switch can also be wired in series with the Universal Control Head Solenoid Electric Actuator (P/N 83-100034-001) to open the releasing loop upon system actuation (Figure 3). Alarm/Release Terminal Type Microswitches are not used for electrical shutdown (i.e., appliance, gas, makeup air). Quick Connect Microswitch Kits (P/Ns 87-120039-001 and 87-120039-501) are available for shutdowns. The Universal Control Head has two separate micro switch mounting locations to support up to four (4) micro switches (any combination of Quick Connect and/or Alarm/Release type). Each of the two mounting locationshas a corresponding EMT port for wire leads, allowing the use of two electrical junction boxes for separation of signal lines and AC lines.
- For use in both Range Guard® Commercial Cooking Fire Suppression Systems and Industry Guard™ Industrial Fire Suppression Systems
- Used for Alarm Circuit and Release Circuit
- Screw-type Terminals for Secure Wire Mounting
- For Use with Universal Control Head (UCH)
- Meets Alarm Requirements for CSA (Canada)
- Stackable with Quick Connect Universal Control Head Microswitch
- Ships with Non-Conductive Barrier
Specifications
| Model | 87-120047-001 |
| Warranty | 6 year limited |
The microswitch kit (P/N 87-120047-001) includes the switch, non-conductive shield and mounting hardware. The Alarm/Release microswitch provides approved supervision for the alarm zone circuit of the Kidde AEGIS™ and ARIES™panels, and for other UL Listed control panels (Figure 2). The switch can also be wired in series with the Universal Control Head Solenoid Electric Actuator (P/N 83-100034-001) to open the releasing loop upon system actuation (Figure 3). Alarm/Release Terminal Type Microswitches are not used for electrical shutdown (i.e., appliance, gas, makeup air). Quick Connect Microswitch Kits (P/Ns 87-120039-001 and 87-120039-501) are available for shutdowns. The Universal Control Head has two separate micro switch mounting locations to support up to four (4) micro switches (any combination of Quick Connect and/or Alarm/Release type). Each of the two mounting locationshas a corresponding EMT port for wire leads, allowing the use of two electrical junction boxes for separation of signal lines and AC lines.
- For use in both Range Guard® Commercial Cooking Fire Suppression Systems and Industry Guard™ Industrial Fire Suppression Systems
- Used for Alarm Circuit and Release Circuit
- Screw-type Terminals for Secure Wire Mounting
- For Use with Universal Control Head (UCH)
- Meets Alarm Requirements for CSA (Canada)
- Stackable with Quick Connect Universal Control Head Microswitch
- Ships with Non-Conductive Barrier
FIRE SUPPRESSION SYSTEMS
Badger Fire offers both Industry Guard for Industrial Applications and Range Guard for Commercial Kitchen Applications. Industry Guard is an economical, easy to install and maintain Dry Chemical system, ideal for protecting industrial applications and spray booths. Range Guard is a Wet Chemical system that suppresses fires within commercial kitchens full of ranges, broilers, fryers, and other high temperature cooking appliances.
ABOUT BADGER FIRE
Badger fire protection products have been manufactured for more than 100 years. Located in Mebane, North Carolina, Badger offers a comprehensive range of industrial-grade fire extinguishers, dry chemical fire suppression systems and Range Guard®, the nation’s first commercial kitchen wet chemical fire suppression system. Badger designs and manufactures industrial-grade fire extinguishers that solve customer challenges while setting the standard in fire protection performance and value.